revlock 30 advice

[tonystevens]

Having a little trouble getting my revlock 30 working correctly on my Ys91sr.
It seems to be coming off the gov during certain manouvers, for instance flying backwards with a half piroflip into inverted usually around mid stick.
Definately a gov issue as it doesnt do it with the gov turned off.
This gov worked straight out the box on my OS engines with no adjustments needed so maybe one of the paramiters needs tweaking for it to work on the YS but i cant figure out which one.
Does anyone here use this combo on their heli and could give me some idea what i need to adjust to stop it dropping off the gov.

im running a headspeed of 1950,(61% value on Aux 2 endpoint)
DS 620 throttle servo


Many thanks Tony

[tonystevens]

Any ideas people?

[Ads]

All i can think of is the sensor position. Try repositioning it and try again, and make sure you have the range correct, that it in the 14K+ range (this resets when you reprogram the end points)

[tonystevens]

All i can think of is the sensor position. Try repositioning it and try again, and make sure you have the range correct, that it in the 14K+ range (this resets when you reprogram the end points)

Thanks Ads,ive checked the sensor position and it seems ok,sensor tests checks out ok.
The engine sounds like its dropping off the gov around mid stick but only with certain manouvres,its as if i need to up something either in the interface section or on the Tx.
Its weird because on the bench if i flick into idle up the armed led is lit at any stick position which you would expect it to do but its performing as if its coming off the gov around mid stick when theres no load on the engine