**Revlock setup Video**

[mattie-lodge]

Hi Guys,

I've noticed recently that a few people have struggled with the setup up a CSM revlock engine governor. So I decided to make a video of how to do it.

The video covers magnet and sensor install, radio setup using the revlock lights to achieve your desired engine speed and a few extra tips.

Helituning.com have very kindly agreed to host this video for me. Thanks guys

I hope this maybe of help to some of you.

This is my first video so go easy on me You may hear me using the words urm and ur a few times

CSM Revlock Setup

[Ashley Davis]

thanks for the video Matt, very comprehensive.... I didn't notice any ums or urs

[Bart101]

Nice one Matt!!

[3DJIM]

Very well done Mattie!

Jim.

[Tom Burgess]

Nice one Matt

Lol, You have had that avatar for a while now but I have only just noticed that you have your belt on too tight

[mattie-lodge]

Nice one Matt

Lol, You have had that avatar for a while now but I have only just noticed that you have your belt on too tight

No no no!!!, That's actually me

[Pitman]

Well done, Matt!
It is really fantastic seeing members with experience like yours taking the time to do this! This is what makes this forum so great.

[Bruinbear]

Nice one Matt. That will be very useful to a lot of people. I always find it much easier understand something when shown, as oppose to simply reading about it.
I hope you don't mind me adding a small tip...
When setting the gap between the magnet and sensor to the recommended amount, this being between 1-2mm. The simplest method I've found is to place a thin piece of card of the required thickness and place it over the magnet. Now adjust the sensor bracket so as the sensor just touches the card, secure the sensor bracket and simply remove the card. You now have the correct gap.
Mike.

[adieuk]

thanks matt,
this will come in very handy m8
thankyou

[richieclarkie]

Only 6728 Ums! That's pretty good for a first attempt dude. Um... next time I think you should go for more

Seriously though a really helpful video dude! I actually watched it all the way through and only glazed over twice....

[robgt]

I've found more "er's" are better

Cheers,
Rob

[machasm]

Nice one Matt. I didn't even notice the 'ums'
Ade.

[fudded]

Thanks very much, very informative.

[mattie-lodge]

I actually watched it all the way through and only glazed over twice....

What, for the first and last ten minutes

[easypickingsere]

Great load of info there Matt! Bookmarked this page for future use, thinking of getting one of these as a DX7 is out of my price range for now.

Cheers

Mark