GP780-DX7 Gain settings

[shikari_chaos]

Hi guys, I was just hoping that you can offer some advice..
I recently purchased a T-rex 500 esp and have completed the build but
I have never used the Align gyros before and was just hoping some one can help check my settings/point me in the right direction for the settings on my DX7.

I want to use the gear switch to set the gyro into rate mode but you'll see this in my settings. I'm a little unclear how much gain to use (gear travel adjust)but from what I've found in other threads and bits on the net these are the settings I've come up with.... just let me know what you reckon.. (some say around 70% but i think that was using the gyro sens menu which becomes disabled when you set the input select for gear to gear) Hope this makes sense and many thanks for any input

Input select:
Gear / Gear

Travel Adjust:
RUDD
L 100%
R 100%

GEAR
+35
-30

[shikari_chaos]

Any T-rex 500 esp flyers using a GP750/DX7 in here that can offer some advice?

[lex7919]

I never use end points find the GP gyros dont like it that much and or a little personal preference to use gyro sense menu in which 62% holds like a pitbull.
Your end point numbers look about right though as 62% equates to roughly those numbers in end points.

The GP's are mega simple to set up and will tell you imediately if your gains to high as you take off, it will wag instantly!

Hope that helps

[shikari_chaos]

thanks for the advice, I'll see how it goes using end points but may well try gyro sens as you've advised. Cheers for the info!