Which way to install the gyro?

[fredted40x]

Hi,

I just got a new gyro as the one on the twister storm is rubbish, but im not sure which way you are supposed to install it,
is it

|----

or

-- ------

(Where the | is the gyro)

At the moment the stock gyro is mounted with the sticker and the gain screw facing the motor, is it supposed to go this way or are you supposed to have the side opposite to where the cables come out facing the tail?

Thanks

p.s. all picture of the blade 400 show it
|------
but the manual says like
-- ------

[sacko]

What gyro is it?

You need to lay it flat and 90degress to the mainshaft usually

[fredted40x]

its the eflite g110.

[sacko]

Like this then

[westray]

I think you will find that this is the same gyro as came with the 3d Storm.The Blade 400 uses exactly the same parts as a 3d Storm apart from the frame,

[fredted40x]

ok, to double check the sticker and gain faces the tail.

Yeah the twister is almost the same as the 400, not the same gyro unfortunatly and many people have problems with it, including me.