-
-
the latest firmware _should_ be the best, otherwise whats the point of updating it
www.heli-extreme.co.uk a good club in south Sheffield
600n pro BeastX Align DFC head bls251, 3xbls451, align gov, 600d, 2in1
trex500, BeastX DS510 swash, Beast X cutr and carve head DS520 HK3026-1900, Align 425D blades, 5S4200 rev'trix, K&BDD dampers, AR6200
"450" superframeSTK, align DFC head v2tail, hk22281-8 on 3S 9650w9257gear commander 55A align 325D hitec digitals Tarot ZYX, AR6100e
MCPX kbdd tail and blades, miniaviation bats
Dont spend more flying models than it costs to fly for realComment
-
My 560 kicks butt over a 401 and my 720 is just the best.....plug play, minor tweak....job done!!!!! Never touched either since!!!!!!
Cue the bun fight!!!! LOL
Comment
-
No bun fights ta
Just factual posts... as they can help isolate problems etc
Cheers,
RobTeam Align, Midland Helicopters, Optifuel, Cyclone Blades, Scorpion Motors, Thunder Power, Savox Servos, JR Propo
| 3D ChampionshipComment
-
401 in my opinion has a much harsher stoping rate in comparison to my 560.
A bad set up IMO will show up more with a CSM but in my eyes that is a good thing!!!!Comment
-
How can the tail whipping be tuned out or reduced? I'm trying piro tic-tocs at the moment and its proving hard keeping the tail consistant when adding the pitch..... i know its half my fault i expect for not being smooth enough but every little helps
Sponsored by - Align - CSM Gyro's - OptiFuel/OptiPower - Kontronik Drives UK
Align 700E DFC
www.robochallenge.co.ukComment
-
so which is best?Gaui x7 lush
Gobbalin 500
Trex700 new dfc n OS 105/vbar love it
ALL ON SPEKKY GEAR
Blade 130x2
nanoComment
-
An update with regard to my recent experiences moving over to the CSM 720 from the Spartan.
For the past year and half I have been flying Spartans 760s. I got my first one not long after were released and have always enjoyed flying them. Hold is excellent and on the whole not too fussy.
During the same time period I've always wondered why many of the guys I fly with like the 720. I've flown a few different helis with 720s fitted in the last year including Matt Lodges 700 and his Aurora plus I flew Ashes 450 pro recently. It struck me that the tails on all these helis were very linear in feel, superb hold and really consistent piro rates.
I decided a few weeks back to fit a 720 to my TREX 700 to see how it felt compared with the spartan. First proper flight and I was immediately comfortable with the feel. My confidence in the tail was far greater from the off than I could have imagined. I was doing walls of death at half the height I felt comfortable with before.
I was always told by people like Ade that CSM were rubbish and very fussy to setup. From my experience so far nothing could be further from the truth. I personally changed the stop gain settings on mine but as standard they were fine. It really is a plug and play gyro.
The Spartan is an excellent gyro, but I am definitely going to fit CSM 720s to all my models from now on.Slow Mo Blade 550xComment
Tweet
Comment