Announcement

Collapse
No announcement yet.

Gyro recommendations

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Gyro recommendations

    Im looking to change the gyro on my micro electric (it’s a walkera so the one on it is not that good) can I get some ideas please on a ok gyro for a beginner with a zoom/shotgun size heli.

    Thanks

    edit: i know the 401 is the best out there at the moment but this is a bit of an overkill for this application...
    -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-

    Brian

    Trex 450s CF
    Dragonfly
    Tags: None
  • #2
    Futaba GY401
    Clones are bad


    .... that includes Align ones

    Comment

    • #3
      edit: i know the 401 is the best out there at the moment but this is a bit of an overkill for this application...
      Why? with a proper gyro it will be easier to set up and perform betteron a heli of any size. I used my old Trex 401 in my Raptor 90.


      I guess you could try the CSM
      Clones are bad


      .... that includes Align ones

      Comment

      • #4
        Hi

        I used the Airtrix 500g on my Trex up until I ditched it into the ground (Not the Gyro's fault)

        I'll let you know if it survived the crash in due course. If it has then I will buy another for my Shuttle

        Not bad value for £50 with both HH and normal mode along with remote gain.

        Cheers

        Mark
        sigpicx2

        Airskipper 50 - For sale

        Comment

        • #5
          i put a csm180 on mine,,,,works pukka
          i found the walkery gryo wasnt fast enough.....even in avs mode,,,,,,
          i changed mine to the cms 180....seems a bit big on the heli...but sorts the tail right out....

          pic up.a csm180 on ebay 15quid or so,,,,carnt go wong.


          worth a look

          http://www.rcmods.co.uk/walkera-36-c42.html

          stev
          Last edited by abyiss; 12-09-2006, 05:01 PM.

          Comment

          • #6
            i wouldnt bother upgrading it, the gyro isnt really the issue the speed at which the tail motor can change speed is more of a problem.

            leave it stock and fly it to death.

            abyiss, this isnt a 36 its a hummingbird FP clone with a motor tail.

            Ade
            www.accurc.com
            adrian@accurc.com
            This is an apple free zone
            anybody can be an Arsehole, it takes real commitment, dedication and a whole lot of effort to be nice.

            Comment

            • #7
              kinda.(.......almost a mini raptor,,,30...belt drivern tail,,

              ,,mybe the gyro from stock is faulty......mine was just a little slow...but did work fine,,,,,

              i ran mine in avs mode,,,tail locked sweet,,,,(but im runing upgraded brushless motor,,and activator..DONT FOR GET LIPO..1oc 11.1v........2200mah .rest is standard dragonfly 36....
              futaba reseiver,,,,



              couldnt hover mine about on standard motor...wasnt enough control....
              Last edited by abyiss; 12-09-2006, 09:11 PM.

              Comment

              • #8
                thanks abyiss will look for a csm on the ebay the one im trying to get in teh ait is the 35, the shaft driven tail.
                -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-

                Brian

                Trex 450s CF
                Dragonfly

                Comment

                • #9
                  its a 36,,belt tail...........







                  just twigged...your a on 35......lol

                  lol...
                  Last edited by abyiss; 13-09-2006, 05:42 PM.

                  Comment

                  Previous template Next
                  Working...
                  X