Tweet
Will thease servos take 7.4V?
-
---------------------------------------------------
Trex 700n DFC.
Trex 700e TOP.
Trex 700e Pro.
Trex 600n DFC.
Vbar Controller. -
Yes indeed Arwel.
As with the JR8915s your warranty is invalid using this voltage though.
-
...but if you but the same JR servo in a fancy case and pay ££££ then there is a warranty on 7.4v (actually 8.4 when the 2s lipo is fully charged).
If you are concerned about over volting your swash servos running direct off the lipo one way is to only charge your lipos to 80% with a charger that balances during the charge not just at the end of the charge (guess which make of charger will do that).
I'm quite interested in running the swash and rx direct off the lipo as this might make the heli saveable after a total regulator failure (given luck and skill).
....whos going to try a DS620 on the tail direct off a 2 cell lipo? A CSM720 will take the voltage I'm told!www.heli-extreme.co.uk a good club in south Sheffield
600n pro BeastX Align DFC head bls251, 3xbls451, align gov, 600d, 2in1
trex500, BeastX DS510 swash, Beast X cutr and carve head DS520 HK3026-1900, Align 425D blades, 5S4200 rev'trix, K&BDD dampers, AR6200
"450" superframeSTK, align DFC head v2tail, hk22281-8 on 3S 9650w9257gear commander 55A align 325D hitec digitals Tarot ZYX, AR6100e
MCPX kbdd tail and blades, miniaviation bats
Dont spend more flying models than it costs to fly for realComment
Comment