Align DS610 servos

[t-rex pedro]

Ok guys

After 'borrowing' servos, gyro etc from one of my 600's to get the 700 going I have slowly got together the parts to get it flying again including 3 DS610 servos.

Well, tested them this evening and I have to say they are BRILLIANT!!

At my level I honestly could tell no difference between the Aligns and the 8915's I have in my other helis.

I know the cases have been known to be brittle and this may happen to mine but overall, for the money, I cant fault them.

Longevity is the next test. We shall see!

[robgt]

They work well, and mine still centred perfectly when I removed them recently.
Just check the cases often.

All should be fine!
Cheers,
Rob

[t-rex pedro]

They work well, and mine still centred perfectly when I removed them recently.
Just check the cases often.

All should be fine!
Cheers,
Rob

Yeah, I remembered not to overtighten them and make sure they were square after your post about the lugs Rob.

[moonmanflyer]

Yeh they work well pete, run them now in my super pro and hold alot better than the hs6965's that were in before, very good servos and will use them in any other future 50 size i build, for the money they are superb

[t-rex pedro]

Yeh they work well pete, run them now in my super pro and hold alot better than the hs6965's that were in before, very good servos and will use them in any other future 50 size i build, for the money they are superb

100% agree James. Time will tell but as it stands they are awesome and, here it comes, the best value product I have ever purchased on anything heli related!!! There is no need to buy 3152's etc as a noobie only to upgrade later when these servos cost about a tenner more and will outfly most.

[mark lane]

I have installed them on my new super pro.... Still running in so have not had a chance to really put the heli through it's paces but fitted them without hesitation following good reports.

[ChrisB]

Pete

I have them in one of my 600N`s and they are great.

They have had a fair bit of use now also.

[Drewbags]

I too have them on my NSP and think they are as good as any other top end servo I have tried. I know Align don't have the greatest rep for electronics but I am impressed with this offering so far.

[kenny.c]

What voltage are you guys running these servos on......?? 6 volts..??

Thanks
Ken

[robgt]

Yes, regulated 6 volts.
Cheers,
Rob

[helinut]

got 3 for my Logo 600 flybarless, so hoping for good things.
Unfortunately, one was a bit duff, so waiting for a replacement before I can evaluate them

[jamiem]

anyone got any updates on these? Im thinking about a set for my newly acquired synergy n9 but as ive just been saying to Tim (busterboy) on MSN, im still mildly scepticle about using such a cheap servo in such a big/expensive machine.

[Tim Procter]

As quoted to Jamie via msn, Bought 3 of these for my latest 600Pro and really can't fault them.

Maybe just me but I cannot tell the difference between these and the 8915's in my 600nsp.

[ChrisB]

I have 3 off 610`s in one of my 600N`s they have been in there since they first became available and they are faultless.

My first Logo 500 has 3 off 620`s fitted and they are great too..

[t-rex pedro]

Yup, thumbs up from me too. Can't be beaten for the money.