[b]HELP ME!!! FUTABA GY 502[/b]

[RIMAN]

Hi everyone My name is Gonalo and i from Portugal, i have a caliber 30 for a long time and now i make a gyro upgrade or shoud i say "unpgrade"!
I buy a new 502 for the heli and since a mount the gyro the heli never leave the ground again!
I dont know what to do! i read all the manual, but sitll i can not do a good setup for flying!
When i press the trottle stick the tail starts spinning arrond!
I have a futaba 9zap!

Help me if you can! i dont now what to do!!!

Tanks

Gonalo

PORTUGAL

[Twister3D]

Have you tried the reverse option
page 16 of manual you can switch between normal or reverse.
I bet you need to reverse your Gyro


Twister

[Janek]

The 502 is pretty much "plug and play", you just need to set the end points, check the direction, and off you go.

Sounds like you have the gyro reversed

[Mack]

What servo are you using on the tail?

[Ade_Law]

502 is very similar to the 601.

this might help:

http://www.jkheli.com/601.htm

sounds like you either have revo mix switched on or you have the gyro sense reversed

are you using the 9254 tail servo?

Ade

[RIMAN]

Gyro 502

Hello everyone, thanks for the tips this weekend i gone check all the things you said here and them i come here and say something.

Thanks

Best Regards to all

Gonalo

PORTUGAL