E Sky Belt CP gyro set up?

[SparkleBee]

Hi guys,
Went to fly my mates Belt CP for the first time today, but there seems to be a problem with it. As you throttle up and bring it in to the hover, it spins rapidly to the left, add a click or two of right trim, and it spins violently to the right. It is the ready to fly/crash version, supplied ready built and set up, and its fitted with an E Sky non HH gyro and digital tail servo. He has however replaced the supplied Esky receiver with a Spectrum AR6200, and bound it to his DX6I. All other controls seem fine. Any ideas before we just stamp on it?!
Cheers.

[squeaky pete]

i think it bcoz you in rate mode, change the gyro to a HH, shld get ride of the problem

[unwind-protect]

Violent spinning both ways is usually an indication that the gyro sense needs reversing. Is it possible you changed that (or changed the positions of linkages to the tail rotor) while installing the new radio?

[SparkleBee]

Violent spinning both ways is usually an indication that the gyro sense needs reversing. Is it possible you changed that (or changed the positions of linkages to the tail rotor) while installing the new radio?

Thanks mate, maybe he did change something, or plugged the gyro/rudder into the wrong receiver position. I will reverse the gyro tomorrow and see if it works.