Tweet
on the mini pred it has a 9gm sevo witch i have broke can i fit any 9gm sevo to it or do i have to get the one that gose with the mini pred if this is the case where can i get one please help........
-
-
Any one should do, so long as its fast enough and as enough torque. What gyro are you using? It might be worth getting a decent gyro/servo combo for your heli. Have heard the new Align gyro/servo combo is pretty good. Only cost about £70 tooTrex 500ESP - Scorpion motor, CC ice 75 esc. Spartan Quark gyro, Std Align servos
Knight Sport - Spartan/BLS251, Hyper 50, 3050's on cyclic, 3D mixer arms
Outrage Fusion 50 - Viper 700kv, 14t, Align servos, Spartan, 8s, Hobbywing 100HV. Maidened - Love it, set up to fly really smooth :-)
Gootch 450SEv2 built and flown, very nice heli :-)
MCPX BL
MPX Twinstar (In bits!!)
DX8/Futaba T9CP
Phoenix -
I have a Falcon 3D (the art-tech equivalent to the mini pred) and there were plenty of posts on other fora about swapping the tail servo out for a faster (and probably more reliable) hitec hs-55 - it worked fine first time, and you can buy these servos for less than a tenner pretty well anywhere.
Just watch how you set the servo arm (in terms of how far out from the centre the ball link is) when you put it back together
Hope that helps
AndyComment
-
I used to run a 9257 on the tail of my mini pred with the standard gyro ... Never had n e probs with it once it was set up right ... Align gyro combo might be the way to go as the 9257 is about £50 ...Comment
-
I note you didn't leave it on when you sold it me!Originally posted by Mike W View Post
In answer to the original question, yes, a standard 9g servo will do as that was all that was there to start with.Raptor 90 SE FBL e-conversion, Raptor E720, Raptor E820, Synergy E7, Goblin 700 & TREX 700NComment
-
Comment