Govenor magnets

[marktigere1]

Hi Folks

Seen the CSM magnet PCB's for the Trex 600 on Trev's 600 at MK Flyin and also at Real Raptors.

http://www.realraptors.co.uk/shop/in...oducts_id=2401

These look like a great idea and look so much more secure than drilling out the fan.

One question though, could they be used on a Raptor ie. epoxied onto the top of the main gear?

Really fancy getting my Revlock into action and looking for a good secure installation route.

Cheers for any info.

Mark

[Steve]

You won't need them on your Raptor.

Just fix the magnet the way it says in the instructions - 4mm hole through the fan and epoxy in from both sides. If you want a bit of extra security, drill the hole behind one of the fan blades, and if you want to be absolutely even on balancing then use a counter balance weight on the other side, although this really isn't necessary.

[Edders]

yeah I agree just use the standard mounting system on the raptor if you need the bracket just shoot me a PM

Edders

[marktigere1]

yeah I agree just use the standard mounting system on the raptor if you need the bracket just shoot me a PM

Think I'm sorted but thanks for the offer Mike.