Announcement

Collapse
No announcement yet.

Servos for 3S 450L

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Servos for 3S 450L

    I've just had a crash and have wrecked 2 of the cyclic servos. They're DS416M which are out of stock everywhere, as are the gear sets. Any suggestions on what I can replace them with instead? I only do flips and rolls and a bit of inverted.
    Align Trex 700XN VBar Neo with Pro Rescue
    Align Trex 550 DFC VBar Neo with Pro Rescue and Current Sensor
    Goblin 500 VBar Neo Pro and Current Sensor
    Trex 450 Dominator 3S

    VBar Control

  • #2
    Hi electrichelicoptershop.co.uk has them in stock as a fellow club member had the same problem and this is the only place he could get them.

    Comment


    • #3
      Hi Kieth, I use these to save damage to servo's , much cheaper than replacing servo's

      Tarot parts TL2257 Gear Protect Servo Horn for Align 410M Futaba 3156 10PCS | eBay
      Goblin , 380 Carbon
      Oxy 4 - 360
      Oxy 4 - 325
      Oxy 3 - 250 , 3s
      Oxy 3 - 250 , 4s
      Oxy 3 - 280 , 3s
      Oxy 2 - 190
      Oxy 2 - 210
      XK K110. X 4 (best micro I’ve ever owned)
      Spektrum DX9
      Revolectrix PL6 & PL8

      Comment


      • #4
        Originally posted by Raptormad2 View Post
        Hi electrichelicoptershop.co.uk has them in stock as a fellow club member had the same problem and this is the only place he could get them.
        Thanks mate but looks like they've only 1 left.
        Align Trex 700XN VBar Neo with Pro Rescue
        Align Trex 550 DFC VBar Neo with Pro Rescue and Current Sensor
        Goblin 500 VBar Neo Pro and Current Sensor
        Trex 450 Dominator 3S

        VBar Control

        Comment


        • #5
          Originally posted by kenny d View Post
          Hi Kieth, I use these to save damage to servo's , much cheaper than replacing servo's

          Tarot parts TL2257 Gear Protect Servo Horn for Align 410M Futaba 3156 10PCS | eBay
          Good idea actually. I need replacement servos first though.
          Align Trex 700XN VBar Neo with Pro Rescue
          Align Trex 550 DFC VBar Neo with Pro Rescue and Current Sensor
          Goblin 500 VBar Neo Pro and Current Sensor
          Trex 450 Dominator 3S

          VBar Control

          Comment


          • #6
            Try Turnigy 306 servo's. I have them on my 450. They are brilliant.
            Tron 7.0 advance Vbar evo V Control
            Foamy plank
            icharger 3010b, Coolice 24v psu
            Member of MK Heli Club and LMAC

            Comment


            • #7
              Originally posted by Mike Sanders View Post
              Try Turnigy 306 servo's. I have them on my 450. They are brilliant.
              https://hobbyking.com/en_us/turnigyt...05sec-21g.html

              These ones.
              Align Trex 700XN VBar Neo with Pro Rescue
              Align Trex 550 DFC VBar Neo with Pro Rescue and Current Sensor
              Goblin 500 VBar Neo Pro and Current Sensor
              Trex 450 Dominator 3S

              VBar Control

              Comment


              • #8
                Yes, they're the ones. As you will see, reasonably priced too.
                Tron 7.0 advance Vbar evo V Control
                Foamy plank
                icharger 3010b, Coolice 24v psu
                Member of MK Heli Club and LMAC

                Comment


                • #9
                  Originally posted by Mike Sanders View Post
                  Yes, they're the ones. As you will see, reasonably priced too.
                  That looks like the answer for me. Cheers.
                  Align Trex 700XN VBar Neo with Pro Rescue
                  Align Trex 550 DFC VBar Neo with Pro Rescue and Current Sensor
                  Goblin 500 VBar Neo Pro and Current Sensor
                  Trex 450 Dominator 3S

                  VBar Control

                  Comment


                  • #10
                    What ESC do you have on Mike? I think mine is fried hence the crash. It was the stock Align BL45X. The heli just sort of stopped flying and dropped out of the sky and I saw a bit of smoke. The lipo seems to be ok.
                    Align Trex 700XN VBar Neo with Pro Rescue
                    Align Trex 550 DFC VBar Neo with Pro Rescue and Current Sensor
                    Goblin 500 VBar Neo Pro and Current Sensor
                    Trex 450 Dominator 3S

                    VBar Control

                    Comment


                    • #11
                      I have had the same problem, going to try a hobbywing v3 50amp... A few people use them where I fly and lots of good feedback on here as well...

                      Comment


                      • #12
                        Hi Keith, I think I have a brand new set ( unopened) of three savox 0255mg servos £53 delivered if that's any help to you
                        Last edited by kenny d; 04-02-2017, 11:45 PM.
                        Goblin , 380 Carbon
                        Oxy 4 - 360
                        Oxy 4 - 325
                        Oxy 3 - 250 , 3s
                        Oxy 3 - 250 , 4s
                        Oxy 3 - 280 , 3s
                        Oxy 2 - 190
                        Oxy 2 - 210
                        XK K110. X 4 (best micro I’ve ever owned)
                        Spektrum DX9
                        Revolectrix PL6 & PL8

                        Comment


                        • #13
                          Originally posted by kenny d View Post
                          Hi Keith, I think I have a brand new set ( unopened) of three savox 0257mg servos £53 delivered if that's any help to you
                          No thanks mate. I'm going to try the Turnigy ones.
                          Align Trex 700XN VBar Neo with Pro Rescue
                          Align Trex 550 DFC VBar Neo with Pro Rescue and Current Sensor
                          Goblin 500 VBar Neo Pro and Current Sensor
                          Trex 450 Dominator 3S

                          VBar Control

                          Comment


                          • #14
                            Originally posted by keithspurs2000 View Post
                            No thanks mate. I'm going to try the Turnigy ones.

                            Good choice
                            Goblin , 380 Carbon
                            Oxy 4 - 360
                            Oxy 4 - 325
                            Oxy 3 - 250 , 3s
                            Oxy 3 - 250 , 4s
                            Oxy 3 - 280 , 3s
                            Oxy 2 - 190
                            Oxy 2 - 210
                            XK K110. X 4 (best micro I’ve ever owned)
                            Spektrum DX9
                            Revolectrix PL6 & PL8

                            Comment


                            • #15
                              Robotbirds do the Hobbywing 50 V3 esc, but if you want active freewheeling then go V4. The program box is also handy. I've used the V3 in my 450L and the V4 in my G380 without any problems.
                              https://www.robotbirds.co.uk/default...and-plane.html
                              https://www.robotbirds.co.uk/default...ogram-box.html
                              Hobbywing Platinum 60A V4 Brushless ESC For RC Model Sale - Banggood.com

                              Servos, kst are getting a good reputation.
                              KST DS215MG V3.0 Metal Gear Micro Servo 20g For RC Models Sale - Banggood.com
                              TDR (awesome machine) and TDF (almost built)
                              Strike7
                              SAB Kraken 700 & 580, G570KSE, G420, Buddy 380
                              XK-K110 x4
                              Futaba 18SZ
                              Member of the MKHELI Club

                              Comment

                              Working...
                              X