Align Gov Sensor Plug

[nickwap]

Hi Guys,
Can anyone tell me the name of the plug on the Align Gov Sensor,
I want to use one on a VBar (because its fitted already) and I don't want to hack the cable.
The other option is a converter from the Align plug to a 'Normal' servo plug, anybody sell them?

Thanks

Nick

[waveydavey]

Is it the JST-SH

HobbyRC.co.uk. JST SH 3-pin Connectors (1.0mm pin spacing w/ 100mm wires)

Am I reading that right Nick, Align governor sensor to standard servo plug for Vbar governor input. If so would you ever want to change back.

So, one of these

[nickwap]

Is it the JST-SH

HobbyRC.co.uk. JST SH 3-pin Connectors (1.0mm pin spacing w/ 100mm wires)

Am I reading that right Nick, Align governor sensor to standard servo plug for Vbar governor input. If so would you ever want to change back.

So, one of these

That is exactly correct! Thanks, Nick

[waveydavey]

That was in a shop called rc-connectors, but the site is down as the fella is in hospital it looks like. I use the same sensor in the same way and just nipped the JST off and crimped a standard servo plug on. Remember to reverse the positive and negative, IE swap them.

http://www.rc-connectors.com/index.p...90eiugrtnits43

Hobbyking do them

50mm Male JST-SH 1.0mm to Female JR (5pcs/bag)