AR7299BX set up menu J

[Graysheli]

Hi guys on menu J blue light is @7.4 degree needs to be 6 degree
on my trex 450 Pro V2 DFC what would be the best way to alter to get 6 degrees
I've upgraded to DFC head same servo horns !
Thanks Gray

[WildWake]

I think with mine I ended up moving the balls in on the servo horns too get less travel which gave me the blue light

[3dbasher]

If your using a conventional swash/non DFC which you are? its fairly easy just use some shorter balls on the inner of the swash OR some small spacers (1.5mm ish) on the 3 outters between it and the balls.
You need to reduce the servo to cyclic imput ratio.... so you get more servo movement/for less blade pitch/increase the resolution, you can just move in on the servo arms but thatll probably be too much the other way and it messes up the geometry much more than the other way i've mentioned