futaba s9202 any good for logo 600 se

[rockyrotti]

hey guys and girls , I Have just aquired a logo 600 se airframe and need a set of cyclic servo's, i have seen a set of Futaba 9202 servos would these be ok for 3d use is the 10kg of torque enough or do I need more or what other servo would you recommend. Thanks for any help.

[trillian]

In my humble opinion the S9202 is marginal really. There was a time when it was considered an ideal heli servo but with FBL it's really not quite up to the job. The rated torque is only about 5kg and the speed is a bit on the slow side. Also the plastic gears will strip every time in a crash.