doggy drilled motor

[sunny_manku1985]

Hi guys I have Just soldered up my motor ready to go in the forza and just noticed that two of the four motor holes are in a completely different position. Surely this can't be right?

I will attached a pic

[sunny_manku1985]

https://www.dropbox.com/s/08zt9ci998...95923.jpg?dl=0

[Guest]

It is intentional, the one in my e700 is the same, the e700 motor mount has the holes offset the same as the motor...not sure why, but it works....

What are the holes in the motor mount like..??

How's you anyway stranger..??

[sunny_manku1985]

I'm good Steve just trying to get my head around this. I can only line up two of the holes on the mount which ever way I put it. Will that be okay?

[Raving Jim]

Ull find 2 are 25mm centres an 2 are 30 mm centres for different motor mounts.

[Planehazza]

Two with thread lock will be secure enough.

[Mike656]

Sunny
The motor mount takes motors with either 25mm or 30mm spaced holes. Rotate it to fit and use the four bolts that came with the motor to secure. The mount then slides to get the right gear mesh.
Mike

[sunny_manku1985]

You guys are all amazing thanks for all the help