Pl6 setup question.

[Cobradave]

Just received my new PSU from Coolice, great bit of kit (thanks Coolice), now setting up on pl6. It is a 25v 2400 watt unit, so when I come to set the maximum current on the pl6 I have about 90+ amps available to me. The max current setting only goes up,to 40 amps on the unit, so do I just set it at the max 40 amps. I have set minimum voltage to 12v, just below 50% of the unit. Are these setting right please?

many thanks and happy Christmas all
Dave

[RcRotaryMadness]

Well, your charger is 1000w and your PSu is 2400 which is great as it means you'll never be able to exceed the PSU's supply ability.

I'd set it to max 40 amps and just try it on 23v min voltage.. I'd be surprised if you have any problems at that, you're only drawing 1/2 the PSU's capacity.

[GIXERMAN]

Set to 40amp and low voltage to 24v job done

[Cobradave]

Great, Tx both
dave