New Optipower Parallel Charging Board

[Aidi]

Unless i have missed a trick, i am suprised this has not been posted already...

http://www.optifuel.co.uk/Home.aspx?...itle=OPTIPOWER







Looks like we are being treated to an all singing and dancing parallel charging board in the New Year.

Certainly tempting if its been designed to work with the PL8/Cellpro10s etc.

Can anyone enlighten us if there will be an EC5 discharge connection version as well? Would be suprised if one was not going to be avaialble considering it EC5 seems to the be connection of choice these days.

Rgds
Aidi

[Andy from Sandy]

I can see it has a deans male connector so it will be very easy to make deans female to EC5 device connector link cables.

[Jamin_00]

Think the details were only released over the past couple of days

Yea it has to come with deans but lie Andy says an easy conversion to do and one I think opti will be doing as well.

[LipolyGone]

Parallel charging is something that goes right over my head i'm afraid

[Andy from Sandy]

When I see these kind of gizmos I wonder if the feed cable can for example really carry 30 amps if you were charging 6 x 5000mAh 6S packs. The idea that FMA had of the stacking banana plugs is so the cable only has to carry current for one battery.

[cupracing]

Let's hope it's reasonably priced, cost me over £100 to buy 6 boards and 6 40 amp leads

[Jamin_00]

Be cheaper than that I think

[Aidi]

When I see these kind of gizmos I wonder if the feed cable can for example really carry 30 amps if you were charging 6 x 5000mAh 6S packs. The idea that FMA had of the stacking banana plugs is so the cable only has to carry current for one battery.

I would be very suprised if Andy would even consider something like this unless it was a tried and tested product and met with all saftey requirements... But i do see where you are coming from.

Perhaps it has restrictions on its capacity?

[SLIPPERY STEVENS]

Any idea when these are out and cost. Looks great.

[sacko]

That looks good, shame it isnt EC5 though.

[t-rex pedro]

Just got my PL8 so defo need one of these!

[SRH990]

They look very similar to the EP Buddy ParaBoard available ParaBoard : EP Buddy, We Power Your RC Hobbies!, you can get them with EC3, EC5, XT60 etc. to suit all tastes.

[sacko]

You can get similar ones at Hobbyking also.

Those dont have the fuse though. I would also imagine, that Cellpro ones have the Cellpro balance plugs to plug straight into the charger.

[Andy from Sandy]

Taking a better look at the picture it shows that each fuse is 40 amps. I would recommend unless you are charging a single pack at 8C to replace them with ones closer to your current draw per pack. It would also appear that there is poly fuses on the board but it doesn't look like they are on both sides so I don't know how that is meant to work.

[Nick B]

6 deans,12 fuses,Andy