I have just got some EC5 connectors for my ESP500. I am a little confused how they go togeather. I believe the tubes go into the male plastic connector and this goes on the battery?
Announcement
Collapse
No announcement yet.
EC5 connector help.
Collapse
X
-
The larger female gold connectors go in the larger plastic connector.
The males go in the smaller plastic
Solder the golds first and then push into the plastic till they click
Never bought a battery with them fitted, but i put the female on the battery and male on the ESC/charger.
Hope that helps
-
Just be careful when you attempt to push the connectors in to the plastic. You'll probably find that to get the connector to click into position you will need to press down on it with something like a hex driver.
Did this on Sunday, slipped and managed to put a 2mm shaft right through my thumb. Went in by the finger nail and out the other side of my thumb!! Hospital tomorrow to have it checked out, looks like it might be infected. Cant fly or play me Guitar - so pretty ****ed off at the moment!
Comment
-
Holy feck that must have hurt!Originally posted by Aidi View PostJust be careful when you attempt to push the connectors in to the plastic. You'll probably find that to get the connector to click into position you will need to press down on it with something like a hex driver.
Did this on Sunday, slipped and managed to put a 2mm shaft right through my thumb. Went in by the finger nail and out the other side of my thumb!! Hospital tomorrow to have it checked out, looks like it might be infected. Cant fly or play me Guitar - so pretty ****ed off at the moment!Harry
Mikado Logo 700 | VBar Neo | JR HV Servos | Pyro 750-50L | Kontronik Kosmik 160HV + buffer pack|
Thunder Tiger G4 E720 | CGY760 FBL | BLS272SV + BLS276SV | Align 800MX Dom 440kv | Kontronik PowerJive 120HV + Opti UltraGuard |
SAB Kraken 580 6S | Spirit FBL | BLS173SV + BLS276SV | HK4025 1100kV | Kontronik Kolibri 140LV + Opti UltraGuard |
And a pillow for the doghouse...
Powered by Futaba 18SZ
Comment
-
That wins the award for grimmest story i've heard today! LolOriginally posted by Aidi View PostJust be careful when you attempt to push the connectors in to the plastic. You'll probably find that to get the connector to click into position you will need to press down on it with something like a hex driver.
Did this on Sunday, slipped and managed to put a 2mm shaft right through my thumb. Went in by the finger nail and out the other side of my thumb!! Hospital tomorrow to have it checked out, looks like it might be infected. Cant fly or play me Guitar - so pretty ****ed off at the moment!Very proud to be an Align-Trex.co.uk Team Pilot!
SABGoblin 700 / V-Bar Blueline 5.3 Pro
Trex 600 EFL Pro / V-Bar Silverline 5.3 Pro
Trex 500 FBL / Beast X
Futaba 8FG
Proud Owner of 2 EGS Awards
Comment
-
-
I find EC3 easy enough but EC5 are a complete nightmare at times! Nearly did the above myself and have damaged a few in the past.Outrage Velocity 50
TT Raptor 30
Tri-Copter - Building Project
www.bestviewedfromabove.co.uk
Aberdeen AeroModellers Flying Club (AAMFC)
Comment
-
Hurt don't come close! When i first saw it after the initial shock, it reminded me of the scene from the Omen - with the spike through the Priest!Originally posted by dani_r View PostThat wins the award for grimmest story i've heard today! Lol
Comment
-
Agreed! I have just received 30 pairs last week to replace the ones I have already soldered on to my lipos....the wrong way round....and all my friends lipos too! A total of 14 lipos not including my new ones! Ballache. But good connectors!Originally posted by sacko View PostGet the Hobbyking ones, they are excellent.Very proud to be an Align-Trex.co.uk Team Pilot!
SABGoblin 700 / V-Bar Blueline 5.3 Pro
Trex 600 EFL Pro / V-Bar Silverline 5.3 Pro
Trex 500 FBL / Beast X
Futaba 8FG
Proud Owner of 2 EGS Awards
Comment
-
What's worse is I really want to see a picture hahaOriginally posted by dani_r View PostThat wins the award for grimmest story i've heard today! LolHarry
Mikado Logo 700 | VBar Neo | JR HV Servos | Pyro 750-50L | Kontronik Kosmik 160HV + buffer pack|
Thunder Tiger G4 E720 | CGY760 FBL | BLS272SV + BLS276SV | Align 800MX Dom 440kv | Kontronik PowerJive 120HV + Opti UltraGuard |
SAB Kraken 580 6S | Spirit FBL | BLS173SV + BLS276SV | HK4025 1100kV | Kontronik Kolibri 140LV + Opti UltraGuard |
And a pillow for the doghouse...
Powered by Futaba 18SZ
Comment



x 3
Comment