Announcement

Collapse
No announcement yet.

Amps required

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Amps required

    Hey all

    Need a little advise on the lipo 6 quad charger

    1.how do you work out the amps required to charge a 6s

    2.everytime I connect I get 'connection break' come up on the screen ?? I've checked everthimg and all seems as should be


    Cheers
    All the gear , no idea and no bloody time!!

    T-REX 600LE
    Velocity 50
    T-REX 500 ESP 3G FBL
    Blade MSR

    Member of:-
    Byley Model Flying Club

    Citizen 00331
    Tags: None
  • #2
    You might have a dry or broken solder joint on the balance plug lead where its soldered to each cell...

    I always charge my packs at 1C - i.e. if the pack is a 2200mAh I charge at 2.2A (2200mA). Newer packs offer multiple C charging rates but I suspect this is at the cost of longevity of the pack itself (you rarely get something for nothing in this life!)
    Rob


    T-Rex 450 Pro - BeastX v3 FBL, Hitec 5065's, DS520, Futaba R6203SB
    Quad x-copter - KK 5.5 Multicopter v4.7, 850KVA motors, 30A ESC's, Orange RC FASST Rx, Carbon & Alu frame, LED strips for orientation, 10x4.5 props.
    Quad x-copter - KK Plus 5.5d, 1000KVA motors, 30A ESC's, Orange RC FASST Rx, GF & Alu frame, LED strips, 10x4.5 props (coming soon!)
    Futaba 9CP & 10CG

    Comment

    • #3
      You've got 50Watts per channel on the Lipro Quad 6 so for a 6s pack the max current available from the charger is going to be 2Amps(@4.2Volts/cell) to 2.2Amps(@3.7Volts/cell). Call it 2Amps max.
      Koz
      Total Relative noob
      Logo 400, TRex 450SEv2, Blade 400, mSR, mCX, HK450(build), DX7, Phoenix Simstick ..... AXN Clouds Fly, Night Vapor, HC Mosquito
      I've found a way to halt reckless heli spending ... Go Broke.

      Comment

      Previous template Next
      Working...
      X