Hi All
Got a Kongpower 4S 2200mAh battery for my Dynatron.
Cell 3 has always been funny, it was always the lowest voltage after use compared to the other three.
Battery isn't very old, maybe 20cycles.
Anyway, it always takes an age to balance charge, Cell3 taking the longest to come up to voltage. I still have always balanced charged it mind.
I decided i'd try to cycle the pack a few times via my charger, to see if i could improve it. So i set my charger on its discharge cycle, discharging at 400mAh.
Voltage steadily drops over the course of 3-4 hours without issue, but its gets down to 3.6-3.6v per cell and cell three suddenly drops to 2.4v and the charger shuts off its discharge.
A balance charge then brings this cell, and the others happily up to 4.2v per cell.
Whats going on? Is the cell recoverable or is it bin time?
Thanks
Matt
Got a Kongpower 4S 2200mAh battery for my Dynatron.
Cell 3 has always been funny, it was always the lowest voltage after use compared to the other three.
Battery isn't very old, maybe 20cycles.
Anyway, it always takes an age to balance charge, Cell3 taking the longest to come up to voltage. I still have always balanced charged it mind.
I decided i'd try to cycle the pack a few times via my charger, to see if i could improve it. So i set my charger on its discharge cycle, discharging at 400mAh.
Voltage steadily drops over the course of 3-4 hours without issue, but its gets down to 3.6-3.6v per cell and cell three suddenly drops to 2.4v and the charger shuts off its discharge.
A balance charge then brings this cell, and the others happily up to 4.2v per cell.
Whats going on? Is the cell recoverable or is it bin time?
Thanks
Matt



Comment