Hi,So yesterday my Gaui X2 arrived. It's Zeeflyboy's, so you can see his very good build thread [URL="http://www.rcheliaddict.co.uk/gaui-range/65245-gaui-x2-build-mini-review-thread.html"]here[/URL]. I managed to fly 7 packs through it yesterday, and what a fun heli it is!Zeeflyboy had upgraded most of the electronics, and I added an HC3SX FBL controller instead of the BeastX. Full specs are below:YGE 30A ESCStock Gaui scorpion motorHeliCommand HC3SX FBL controllerGaui Servos an cyclicsMKS DS95i tail servoTurnigy nano-tech 1Ah 45-90c liposThe HC3SX was a very tight fit, in fact I had to use the thick foam pad which is not recommended. Below are a few pics - unfortunately no flying ones yet.[ATTACH=CONFIG]38674[/ATTACH][ATTACH=CONFIG]38675[/ATTACH][ATTACH=CONFIG]38676[/ATTACH][ATTACH=CONFIG]38677[/ATTACH][ATTACH=CONFIG]38678[/ATTACH]Anyway, I charged all the batteries (take about 10 mins each at 6c)The HC3SX setup took about 30 mins... I wasn't really sure what to expect when flying it; it was a windy day, and I thought the heli would be very drifty due to its small size. It is in fact very stable. The tail was rock solid, and for the first 10 mins I did my usual flying in circles and a few stall turns. I had the HS at around 3900rpm (YGE governor). Anyway, I found myself to be very confident with this, and on the third battery attempted my first loop. That went OK and was much easier than I thought. The tail blew out once, but I increased the gain by about 20 on the HC3SX and this seemed to cure it.Then I thought I'd test the HC3SX bailout whilst inverted. So I held the heli at the top of the loop in a sort of inverted hover, and flicked the switch. Within about 2 seconds it flipped itself from inverted to upright and began to climb!! Knowing that the bail out worked so well, I got a bit more confident with it, and by the 5th battery (I had to recharge the lipos) I could easily do stationary front, back and sideways flips. By the 6th battery I was confidently chucking it around (or what I'd class as that), hovering it inverted and I tried a couple of tic-tocs (these seemed a bit harder than on the sim). Anyway, I did manage to end up crashing it. I had used the bail out about 3 times during all the flights, usually because I had lost orientation as it had gone too far away. On the 7nth battery it had got a bit too far away, inverted, and instead of flicking the bail out switch I had hit throttle hold!! So it dropped a good 40 feet into the grass. I tried my best to auto it, and all that broke was one landing skid!! :)Out of all the helis I've had (logo 400, trex 450, trex 500, mcpx etc) the X2 is easily my favourite. I managed to progress more in one day with it than in 4 months with the 500s, and the lipos are only £7 each )The HC3SX made sure it was extremely locked in, and the bail out gives you the extra confidence to try something new without worrying that you will crash it as much. So, all in all a great little heli together with the best FBL controller I've tried made for 7 very enjoyable flights - I will try and get a video up in the next week or so :)Stanley
Announcement
Collapse
No announcement yet.
Gaui X2 & HC3SX - Wow!!!
Collapse
X
-
Gaui X2 & HC3SX - Wow!!!
Last edited by Stanley Speel; 05-03-2012, 07:58 AM.Trex 700n DFC - YS120, Spartan Vortex
Gaui X5 - Spartan Vortex

-
Sounds like I need one of those bailout flybarless controllers. I just checked the price of them (gulp) and need to think how hard I want one now. Might have to go with original plan and get a beastx instead.
Im a trex 250 flyer. Often looked at the X2. Was only parts availibilty that was holding me back as I still have the odd incident :smile:MCPX, TREX 250 SE FBL, CLONE 450 SE V2 FBL, 450 SPORT V2 3GX
-
I agree the price they are sold for here is pretty crazy. If you look around you should be able to get them for around £280 each. The first one I got by buying a used HC3-Xtreme for £150 and sending it off to robbe to be upgraded to an HC3SX, and the second time I got a new Xtreme off Heliguy and did the same.
If you decide to get one let me know and I'll see what I can do ;) .Trex 700n DFC - YS120, Spartan Vortex
Gaui X5 - Spartan Vortex

Comment
-
How much does the upgrade cost? Might be an option for me. What size is it only Im wondering if it would fit in a Trex250.
I think I will end up buying a beastx for the trex but liking your setup and will have to funnel some cash into the heli account for such a setup.
Look fwd to see your video.MCPX, TREX 250 SE FBL, CLONE 450 SE V2 FBL, 450 SPORT V2 3GX
Comment
-
Nice, i just don't look at price too much, if i want it i go for it lol must say wow too i was very impressed with my X7 may have to add to my GAUI fleet now, can't blame this one on Pinion! dam dose look like a nice bit of halibutt!!!!!
cheers
CuppaGAUI X7 Beast X V3 (a nice bit of fish!)
Trex600n Fbl ys56sr BeastX V3
Trex500Fbl AR7200BX
Trex500 Apache x4bld BeastX. Trex 600E HIND mil x5bld BeastX
DX7se
Comment
-
Hmm being a student I have to look at the price lol, but I suppose the FBL controller will pay for itself eventually :). I would never have got the X2 new, but I think the price I've got it for was very fair, and the amount of fun it is is certainly worth it for me. I suppose it's not too far off an MCPX from the crashes I've seen it go through so far.
I hate the sim too so I can use this as a substitute with the bailout :)Trex 700n DFC - YS120, Spartan Vortex
Gaui X5 - Spartan Vortex

Comment
Comment