Tweet
Just had a hairy moment with my Mini Titan as the washout linkage split where the screw that attaches it to the control arm goes through. Found a spare link in my spares box but no screw, so opened the T/T general screws packet and found what seemed like the right screw. Fitted it but then found lots of slack had appeared. Investigated further and found the washout link screws are M1.7 x 7 countersunk types but these are not part of the main screw kit or listed seperately anywhere, so if you loose one you will need to but a complete washout link and arm set. The only ones in the general screw kit are M1.6 x 7 - hence the slack -you have been warned!
Barry
Barry
