Align 325 Pro Blades

[hydev]

Hi,

After a recommendation from a friend I have brought some Align 325 Pro blades for Mini-Titan. As they thinner than the Thunder Tiger ones I was wondering if you need to put spacers in the balde grips or if you can just tighten them down?

Mike

[mark Taylor]

don't tighten them or you will deform your blade grips
Send a sae to me and I will send you some
Cheers
Mark

[Boggy]

or make your own out of a plastic milk bottle/ice cream tub etc

[simplyraptor]

Thunder tiger make their own spacer PV0829

http://www.fast-lad.co.uk/store/adva...PV0829&x=4&y=8

Martin

[h3li]

Thunder tiger make their own spacer PV0829

http://www.fast-lad.co.uk/store/adva...PV0829&x=4&y=8

Martin

I have a set of these TT blade spacers.

Since upgrading to the TT metal blade grips I find that these Spacers are infact too thick - when used with the Align 325 Blades!

So I've taken one of those plastic wallets used to hold A4 paper, and cut a couple of small pieces to size (using the TT spacers as a template).
The Align 325 blades now fit perfectly in the metal grips, with only a little binding, as they should (not too loose/not too tight).

Cheers.