Old motor new ESC any recommended settings?

[BenScoobert]

I have my raptor with this original motor
OBL 43/11-30H
The original ESC gave up the other day and I thought I'd try one of these HK copies.
Hobbyking YEP 80A (2~6S) SBEC Brushless Speed Controller

It flew but seemed a little underpowered compared with before. I can't seem to find info on this old motor that applies to the ESC settings, so I used the stock settings as follows (from the YGE manual)
- Timing = 18°
- Brake off
- Act. Freew. on
- P-Gain = 0,9
- I-Gain = 0,05
- Startup Speed = Heli middle
- PWM-Frequency = 8 kHz )
- Startup Power = Auto 1-32% (sometimes is better 2 or
4%)

Can anyone recommend any advances on the stock ESC settings for this motor?

[p4ddy]

You can also try & find info on the Zpower Z30 as it's the same motor. It's 8 pole i've found that.

[BenScoobert]

You can also try & find info on the Zpower Z30 as it's the same motor. It's 8 pole i've found that.

Thanks I'll look onto that.