Curtis Youngblood ATG settings

[chugga-bug]

Thanks Paulice - I've got the low point set at 35% and the curves for ST-1 at 55-55-55-65-100 and ST-2 at 65-65-65-75-100.

I'm assuming you've got equal pos and neg pitch in these idle up modes, have you?

If you have, then your throttle curves should be the same each side of centre stick.
Why have you only got 55%/65% thr at full negative? I'd also say the centre number is way too high! Your headspeed at zero degs must be mental! 40 - 45% at centre should be more than enough.

[RotorBlade]

Yep - equal +/- in idle up.
I guess the curves are a throw back from the learning days - not doing any fancy manoeuvres yet, just sport flying, circuits and now loops. Both ST-1 & 2 were the same to give me constant headspeed and negative pitch for learning. I've not yet flown with the new curves - just dialled them in today, so they need changing yes?
An earlier post details what they were (52-52-52-75-100) and that didn't give me any crazy headspeed - but shouldn't the governor sort that out anyway?
Thanks for the help, Keith

[Paulice]

Like i said before it's best to set the heli to fly in all modes with no gov then turn on the gov to fine tune the head speed.

[wadders]

I've got a atg on my 700 and I was reading the manual today to make sure it's setup right and just reading it fried my brain! Lol, haven't used a governor before..... Is there any vids on YouTube for setup????

[jwatts007]

Have you got g veiw, they help to set it up..........

[wadders]

Have you got g veiw, they help to set it up..........

G view????

[horsham rc]

g view is a screen for setimg up the solid g gyro and uther cy products sutch as the atg

[jwatts007]

G view????

Get yourself a g veiw it make setting it up simple, it is a very good guvernor better than the align jobbie..............

[wadders]

So Is it a device?

[jwatts007]

Here is a G veiw Curtis G-View Display System YEI-YE-GVIEW
or put a wanted add on here or look through the for sale you often see them there.........

[DaveMac]

I have just setup an atg. You don't need a gview, it's easy without.

[wadders]

Well I can't get my head around it!!! It's driving me insane i must be thick! Lol. Think I'm going to take it to someone that can help me set it up and explain it to me! Anyone know of a model shop in Surrey that can help with this service??

[wadders]

HA!!!!!!! got it!
Bob is awesome!!!!

Trex600 Nitro Pro Build Vids - HeliFreak

this really helped me setup my atg! havent tried it yet but it all makes sense in theory now!

the vid on the atg is just half way down!

[wadders]

Hello all, I've had a number of flights with the atg and it's been awesome, but today I noticed it's not working properly or even at all. It won't switch between head speeds I set. I haven't changed anything....... Checked the sensor is picking up, and the setup still seems the way it should. Any ideas??


---
I am here: http://maps.google.com/maps?ll=51.308910,-0.565817