N9 Servo Arm Pins

[j2tgw]

Hi

I am putting an N9 together and I have Align 610 servos for it,
the servo pins I have are to small a thread , Does anyone
know what the thread size is on the align servos ? fastlads only
have 2mm thread and I think they are the same as the ones I have,
can you buy larger theaded ones or do I have to change my thoughts
on servos

Cheers Tom !!

[jamiem]

From memory there are 2 original sizes, 2 and 2.5mm I think. You obviously need the larger. Try Evolutiorc.com as they always had tons of everything for the N9 when I had mine

[Mylee]

You know that N9 parts support is being withdrawn now? Just try finding a crown gear.
A new N9 is in the offing, but there are no firm dates yet

[Kwickkwack]

Contact Downdraft on the forum, he may be able to help as he has two, you may even be able to buy a complete model from him

[Downdraft]

From memory there are 2 original sizes, 2 and 2.5mm I think. You obviously need the larger. Try Evolutiorc.com as they always had tons of everything for the N9 when I had mine

Spot on 'J' thats exactly right.

As Kickkwack says I do have a complete N9 for sale If your interested, strangely enough it has a full set of Align servo's installed. 620's on cyclic, 650 on rudder & 610 on the throttle. I am prepared to take an offer on the airframe with only the servo's installed if your interested, and remove engine, blades, rx and all the other electronics.

MAKE ME AN OFFER