N5 Manual

[moonmanflyer]

James, if your in any doubt you can always try mine.

Cheers Steve, i knew you would get one.....lol

[Smoothound]

Sod that!!!

I've just ordered 92's for mine

Oh well just have to see how they go I guess

[raptorheli2]

i have about 10 sets of 95mm blades in my spares box so i'm not buying 92's. it's a weird decision to go down the way, i guess there is a reason for it but i'll be 95mm anyway.

cheers

[Swashbuckler]

Regarding the lock ring here is an excerpt from the N5 manual about it:

1. After installing lock ring be sure that the
radial bearings do not have lateral load
on them. Adjust lock ring as needed to
ensure smooth operation.

2. Secure lock ring with CA or Epoxy

So there is no groove on the bushing as the ring position is adjustable and they do recommend some adhesive.

[Swashbuckler]

Also the manual says use of larger tail blades than 92mm "may" invalidate warranty, not that it "will" invalidate warranty.

Shame the opening page has mistakes in it. Does nobody proof read anymore before publishing important documents? tI smiply not gud enuff. On the whole looks like a good manual though, and I'm pretty excited, hurry up and get here!

[ade999]

Hi Guys

i have been running our N5 on 95mm tails as i found that i could get a better tail hold with the larger tail blades.. its fine to run 95mm tails as there is enough clearence..

Also just a bit of advice if you want a machine that tracks like it is on rails and has a nice fast crips cyclic rate yet nice and stable then use the inner holes on the bell and the hiller side of the blade mixers :-)

i am sure everyone will be very happy with the machine.. if anyoone needs any help or advise please feel free to pm me

Ade

[Jamin_00]

95's it is then