Tweet
Hello Everyone,
A short tip concerning the Ball Link Adapter on Page 46 of the E5 Manual.......
Bad things will happen if you attempt to remove the M3x16mm bolt without first removing the M2.5x12mm set screw. Since the M2.5 set screw is sometimes sitting against the M3 bolt, unscrewing the M3 bolt without removing or backing out the M2.5 set screw will destroy the bolt as well as the aluminum Ball Link Adapter.
You can find the updated E5 manual below:
http://synergyrchelicopters.com/E5_Manual_v2.0.pdf
Thanks,
P46E5.JPG
A short tip concerning the Ball Link Adapter on Page 46 of the E5 Manual.......
Bad things will happen if you attempt to remove the M3x16mm bolt without first removing the M2.5x12mm set screw. Since the M2.5 set screw is sometimes sitting against the M3 bolt, unscrewing the M3 bolt without removing or backing out the M2.5 set screw will destroy the bolt as well as the aluminum Ball Link Adapter.
You can find the updated E5 manual below:
http://synergyrchelicopters.com/E5_Manual_v2.0.pdf
Thanks,
P46E5.JPG
