Rave ENV head block pins?

[Dudifiedad]

Hi can u guys measure ur head block pins on the flybared rave because i dont seem to be getting much pitch without binding on the pins

[bish]

About 35mm

[rachel]

hi I am running a flybared Rave and get + & - 14 degrees without problem but if I push the stick in a corner I do get some binding on the pins at full pitch , but since I run a cyclic ring I have no problems.

however WARNING you MUST remove the pins from the headblock , clean them and re loctite them in !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[Dudifiedad]

that was only a problem with the early models