Rave env flybarless with beastx

[Sticky Stick]

Could you please tell us the length between balls on your servos? I used smaller (trex ) balls on the swash, and the inner holes on my JR disks but could not get the blue light. So I just fitted some other JR arms with the balls at around 22.3m apart and now the links bind on the servos. WHile the aileron and pitch servos can have the balls on the outside, I cant do this on the elevator servo.

So I'm at a bit of a loss now. Unless I put the disks back on and lie to the beastx about what is 6Degrees for the blue light!!
Thanks
Cliff
Edit... I've gone for the cheat.. fitted the old JR wheels again and pressed "next" after telling it 7 degrees was 6... if that makes sense..
I did a similar thing with my Protos and it flies great on the BX...
Annoyingly its forecast snow and 22mph winds tomorrow so not ideal for setup... Will have to wait until Thurs

I use the Futaba B type servo arms middle holes 21.5mm apart on Futaba servos. With the mods and the bellcranks on the inner hole you will achieve a blue at 6 degrees. Any futher in on these arms and they will bind.

[MouldyRF]

Interesting you can get away with shorter arms than on my 8717s. I assume thats on Futaba servos?

Mind you the Rave is flying great on the cheat of blue light at 7+degrees and not seeing any wierdness
so far.
Thanks for the info though.

[Richardmid1]

Not sure about JR but I just put the Align servo wheels on mine in the inner hole and you get the blue light just before you hit 6 degrees, perfect! I also get +/-14 and got about 14 degrees cyclic when setting the servo limits in the beastx!

This is the best flying heli ive had to date (7 years!)! ENV, nitro, Beastx and radix 690 v2's = amazing combo!