Kontroniks

[sparts]

Hi All,

Can I use this
Kontronik Jive 60+ HV Brushless ESC with BEC 4612

on this set up
Fusion 50 Flybarred
Outrage 4125-560 on its way
Undecided ESC
Align DS610's on Cyclic
Align DS650 on Tail
Spartan Quark Clear Gyro
Spektrum Ar9000 Receiver with Sat
Undecided BEC
2X Align 6S 3300 40C for 12S
Spektrum DX7SE
600 Size Blades

Thanks
Dave

[danch]

Don't think it would on a 12S Fusion

It's got continuous max of 60amps & think as a minimum you'd need something a bit beefier

[sparts]

It's a pity coz the 80 HV is a little out of my price range.

[danch]

Why not look at either :

Scorpion Commander 130HV with SBEC : Scorpion Commander 50V 130 AMP 12-Cell Hv ESC (If you can get your hands on one)
or
even a Fusion Hawk 120HV Opto : Fusion P-FS-HWK120 - Hawk BL 120A OPTO N14~36/Li4~12

or I have a Scorpion 90a HV Opto ESC i'm sellin (sorry for the plug)

Dan

[Martind]

I asked the same question on HF and they all said no because of the spike loads are higher then 100a.


Sent from my iPhonings

[LaurenceGough]

Remember 60A is minimum which it can provide, hence the +, on 12S my Logo 600 with 623mm blades and a Jive 80+ HV gets slightly warm if I give it a really hard flight. Granted I have a heatsink for the ESC. If you are flying hard a 60A might get a little bit too warm, but you should be able to fit a fan (jcooler JCooler 80 for the kontronic Jive 60/80/100 controllers jc80) and heatsink - the price will be 80HV territory then mind you.