Tweet
I have removed a 2.4 spektrum rx to put on my jr rs10ds 35mhz rx, I don't have 2.4 yet, which servo is which on the protos 500, has anyone a drawing or sketch what goes where?
I hate this part!
I hate this part!
-
-
Plugging them in usually sorts things out. One at a time. Use a rx battery (4XAA) to avoid using the esc.Flasher 450 Sport. Assan GA250 with 520 tail servo, MKS DS450 cyclic.
Multiplex Cockpit Tx, DX7, DX6i
Blade 130-X, MSR, MSRX
Phoenix Sim -
Plugging them in usually sorts things out. One at a time. Use a rx battery (4XAA) to avoid using the esc.
http://www.msheli.com/Manual/MSH_PRO...N_09_03_09.pdfFlasher 450 Sport. Assan GA250 with 520 tail servo, MKS DS450 cyclic.
Multiplex Cockpit Tx, DX7, DX6i
Blade 130-X, MSR, MSRX
Phoenix SimComment
-
The front servo is the elevator.
The two rear servos are your pitch and aileron servos - it does not matter which way round these two are as you can adjust for it in your TX programming.
I dont know what the port assignments are on your JR Rx but on the spektrum module servos go into the following ports
Elevator servo - ELEV
Pitch servo - AUX1 or AILE
Aileron servo - AUX1 or AILEVelocity 50 (w/ Rossi R57) | Atom 500 | T Rex 450V2/Sport HybridComment
Comment