Logo 600 conversion progress!

[est1976]

nice, cant wait to get mine, just gotta get a car purchase out of the way then Im onto it.

[LaurenceGough]

nice, cant wait to get mine, just gotta get a car purchase out of the way then Im onto it.

I done the smart thing, heli first then save for a new car

[p4ddy]

i done the smart thing, heli first then save for a new car

ha ha!!

[ChrisB]

Resurrecting this thread i wondered what parts roughly i need to convert a Logo 500 to a 600.I have the carbon tailbox but meant for the 20mm boom.

I have recently bought a 6 hover old 500se and its been sat in the cupboard but wanna convert it to 600.

I know i need the plastic bits that go in between the frames to stop the boom,the longer boom and belt,skids and canopy,bladegrips but unsure of the brgs and anything else in the head.Will get the mod 1 gear also.

Was considering selling this one and buying a bona fide 600 but decided thats hardly cost effective.

ta

[LaurenceGough]

Hi Chris,

List from Big Fil that I used:

Tail section:
MIK4228 Carbon Tail Rotor Case Set for LOGO 600
MIK4098 Tail Boom LOGO 600-3D
MIK4097 Carbon Tail Boom Brace LOGO 600 3D
MIK4096 Support For Horizontal Fin
MIK1919 Cap Screw M3x40
MIK4091 Logo 600 Tail Boom Holder
MIK4081 Driven Belt
MIK4080 Carbo Horizontal Fin (don't really need)
MIK4074 Hardened Tail Rotor Shaft LOGO 600 3D
MIK4073 Carbon Control Rod For Tail LOGO 600 3D

Head section:
MIK0845 Steel Spindle Shaft 109mm
MIK0915 Main Blade Holder 14mm
MIK0841 Main Blade Grip Thrust Bearing Spacer
MIK0840 Main Blade Grip Thrust Bearings 8x16x5mm
MIK1980 Socket Head Cap Screw M5x12 and washers
MIK0954 Ball Bearing 8x16x5mm (2 bearings per pack, you need 4 bearings total)
MIK4050 Washer for Blade Holder 14mm
MIK1961 Cap Screws M3x35
MIK1974 Blade Holder Screw M4x32

Misc:
MIK4206 Front Canopy Support Set
MIK2496 Skid Pipes (8mm)
600 canopy of choice

These are older part codes so there is most likely newer better part numbers now, just do a search for the names perhaps..

[ChrisB]

Cheers very much for that list,will have a work thru it

[Jamin_00]

Im going the other way.

Was gonna get a 600 but gonna now buy the complete tail section from boom back on my SE so in 20 mins I can go from 690's down to 600's with the smaller boom

[dumb thumb it]

hi guys cf 600se

I am going to start building a logo 600 se cf frame next week i am not sure if to post some pics of the cf frame build or not ????. i really loving my 6003d so i got the se but wanted it not to be the same as the 6003d so cf frame it had to be lol.

cheers alec

[Jamin_00]

Like your reasoning lol.

Pics, yes please

[dumb thumb it]

Like your reasoning lol.

Pics, yes please

ok i will start a thread next week and take some pics with my i phone as i go and post them. the reasoning is a bit lame all i can say is the first time i had a set of the cf frames in my hand i liked them a lot.

cheers alec

[Jamin_00]

Mate, you have justified it so its perfect

Like me, as long as I can come up with ANY excuse then I'm good

[Tim Procter]

Well after years of listening to Lawrence "Bigging up" the Logo's I have finally got myself a new Logo 600SE.

The heli is complete apart from needing an ESC to complete it but I am already thinking about purchasing a 600 3D to go with it.

Never before have I been so excited about getting a heli in the air ever.

After watching Mat Watkin maiden his new 600 3D last weekend it has now made me hungry to get mine in the air.

Stood next to him when it lifted from the floor and couldnt believe how stable and uber still it hovered without any movement/glitches what so ever then when it went into flight it was like nothing I have seen before.

Good setup or a typical Logo I don't know but it was mouth watering to watch.

Lawrence.

After reading years of your "Sales type pitch" on this forum regarding these helis I am about to find out just what you mean..

(No offence meant by that)