Looking for someone to mod a mcpx

[sunny_manku1985]

Hi guys, can anyone mod a mcpx for me? I am thinking of buying a second hand mcpx and wanted to go brushless with the 120 sr tail mod. Is there anyone out there that can do this for me? If so how much will I be looking at?

[Fixxxer]

I'd get hold of the heli first & see how you like it before messing with it. As for cost etc there's plenty of info washing about on the net, just use ya old mate google.

You might also find this page helpful at some point. http://mattbockman.com/?p=6

[sunny_manku1985]

Thanks for the link, very helpful. Think I may pick one up next week and see how it is.

[rapidgaz]

I could do it for you, have gone bl on mine, I would go for the double corless tail mod not the 120 route. Tried both and double is better IMO. With my mod I soldered the steve connector up to the reverse of the board where you get full throttle resolution. However this is the riskiest 1 to do.


Sent from my iPhone using Internet.

[sunny_manku1985]

Could you let me know of costs?

[Fixxxer]

There's a plug and fly kit available, only 2 wires to solder. Ain't cheap tho - MCP X BRUSHLESS CONVERSION KIT with HP05 for E-FLITE - For the brushless main and the matching upgraded powerful brush tail

[rapidgaz]

Could you let me know of costs?

I will do it for nowt, but decide what version u want as in the steve converter type and get all the parts. And pay for the postage.
This is the version I did, but try get ur motor from hobby king think it will beabout 12 quid delivered or less.

Sent from my iPhone using Internet.