Announcement

Collapse
No announcement yet.

MCPX BL Help and Advice :)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #76
    Heres a few photos and modifications I've done to my standard MCPX-BL:

    Lynx Stretch boom with black shrink tubing (Boom length is 15 mm longer than standard one)
    Lynx 125 mm MCPX-BL Main blade
    Lynx 42mm Tail Blades
    Titanium spindle shaft
    Lynx Vertical Tail Fin
    Solid Carbon Fiber main shaft with preinstalled Main Shaft collar
    Ultra Dampeners – Bushing
    Silicone O-Rings
    MicroHeli Aluminum X Swashplate
    MicroHeliAluminum Tail Motor Mount

    The stretch blades and boom & Ultra Dampeners were the most significant upgrade as far as performance goes because it eliminated tail wag for me which I was very pleased about. The rest is pretty much for durability and bling. For example when the boom breaks all you have to do is replace the carbon shaft because all the wiring is on the outside and the tail mount is of course aluminum and just screws back onto the boom.

    Thanks to Rich for suggesting the solid boom kit












    Spektrum DX9
    Align T-Rex 500 Pro DFC
    (WIP)
    BLADE MCPX BL
    PHOENIX R/C V4

    Comment


    • #77
      hi all
      can anyone give me the set up to tame my bl helppppp please i have a dx9 i want to fly in throttle mid stick with a switch to cut of the props
      thanks in anticipation
      roger
      remember I'm a newbie lol
      BLADE 350X * BLADE 130X 1 * BLADE 130X 2 * BLADE NANO CPX * BLADE MCPX X 2 *
      BLADE MCPX BL * BLADE 120SR *BLADE 200 MSR *
      2 WINGS
      TX SPECTRUM DX6I DX9

      Comment


      • #78
        Hi

        Do you have the manual for the MCPX BL?

        If you do set it up as per the instruction manual for the DX7/8/18 and this will give you 3 flight modes. If you want even more tamer settings than the manual try the settings in this post from helifreak MCPX BL Set up for DX9 - HeliFreak post 3

        Rich
        SAB Goblin 700C - Black Nitro
        NEO,Kosmik, OS105, MKS, Cyclone
        V-Control
        Flight Log
        THE MEDWAY MASSIVE
        WEBSITE FACEBOOK

        Comment


        • #79
          thanks
          rich will give it a go
          rger
          BLADE 350X * BLADE 130X 1 * BLADE 130X 2 * BLADE NANO CPX * BLADE MCPX X 2 *
          BLADE MCPX BL * BLADE 120SR *BLADE 200 MSR *
          2 WINGS
          TX SPECTRUM DX6I DX9

          Comment


          • #80
            Originally posted by biker View Post
            hi all
            can anyone give me the set up to tame my bl helppppp please i have a dx9 i want to fly in throttle mid stick with a switch to cut of the props
            thanks in anticipation
            roger
            remember I'm a newbie lol
            As Rich says - set it up as per the manual - throttle hold is the switch you're looking for that cuts the motor. As for mid-stick "throttle" - bear in mind that the left stick isn't JUST throttle - in fact with the exception of normal mode the left stick is COLLECTIVE PITCH only ...

            Might be worth doing some research on collective pitch if you're completely new to helis!
            Tom
            sigpic Synergy E7SE - Kontronic Helijive 120+ ESC, vBar Neo
            SAB Goblin 630 Competition
            - Castle Edge 120HV, vBar Neo
            Blade 700X - Castle Edge 160HV ESC, Mini vBar
            Logo 550SXv2 - Castle 130LV ESC, vBar Neo
            .... and a Gaui X3
            Spektrum DX8 ; Mikado VBC ; RealFlight 7 & neXt sims
            ... and two EGS'



            Comment


            • #81
              hi again
              many thanks for the info all taken in will do some research on collective pitch i have a mate on here wardy has been giving me some sound advice so thanks again for the input.
              roger
              BLADE 350X * BLADE 130X 1 * BLADE 130X 2 * BLADE NANO CPX * BLADE MCPX X 2 *
              BLADE MCPX BL * BLADE 120SR *BLADE 200 MSR *
              2 WINGS
              TX SPECTRUM DX6I DX9

              Comment


              • #82
                Originally posted by biker View Post
                hi again
                many thanks for the info all taken in will do some research on collective pitch i have a mate on here wardy has been giving me some sound advice so thanks again for the input.
                roger
                I've got two great links for you ... One is a YouTube playlist which covers the basics of helicopter flight. I found this invaluable when I was learning. The second site is a great all-round advice site which includes another YouTube playlist that gives a 10-day flight school.

                1/. https://www.youtube.com/watch?v=Cg1C...ECC2E56B68A2C3
                2/. http://www.rchelicopterfun.com
                Tom
                sigpic Synergy E7SE - Kontronic Helijive 120+ ESC, vBar Neo
                SAB Goblin 630 Competition
                - Castle Edge 120HV, vBar Neo
                Blade 700X - Castle Edge 160HV ESC, Mini vBar
                Logo 550SXv2 - Castle 130LV ESC, vBar Neo
                .... and a Gaui X3
                Spektrum DX8 ; Mikado VBC ; RealFlight 7 & neXt sims
                ... and two EGS'



                Comment

                Working...
                X