Blade 400 help

[Sean]

I have rebuilt my blade 400. But when i lift the throttle stick the Elevator moves forward When i move Elevator stick pitch on heli moves Ive tried moving servos but im just getting in a muddle What have i done wrong ?
Sean.

[Boggy]

move the throttle stick up and down. all three servo's should move together,as you raise the stick the swash should fall. as you lower it the swash should rise.( if there is a problem go to the reverse menu in the set up list and alter the pitch/airl/elev servo's till they all work together in the same direction.

now the right stick.
stand behind the heli.
each movement of the right stick should move the swash the same. eg forward tilts the swash forward etc. if you have a problem go to the swash mix menu. you will see the 3 values set with either a + or - %
if the swash tips back instead of forwards change the value of the elev mix to opposite what it is now set at(eg from +60% to -60%)
if the swash tips right instead of left change the airl value to opposite.
if the swash tips at an angle when you apply forward stick change the pitch mix value to opposite

[Boggy]

http://www.rcheliaddict.co.uk/e-flit...ade-400-a.html

[tomatwalden]

Assuming you haven't changed your DX6i since you rebuilt it, and assuming it was working before it needed a rebuild ... have you checked you've plugged the servos into the right receiver ports ?

[Sean]

Thank you Boggy just couldn't get my head round it As soon as i reversed my elevator all was ok.
Sean.

[Sean]

Tom i have set it up to a dx8 sorry i didn't say this.
Sean