Blade 450 not right

[Keith b]

Hi folks got a problem with my blade

Whats happening is on the right stick on the tx if I push it forward heli moves backwards and vies versea when u pull stick down so hope u can help and the reverses are set right to so has got me baffled a bit hope u can help .

[Cagey]

What T/X ? By changing the reverse direction of the elevator does the swash reverse in sequence ? Might be that simple.

[Keith b]

It's dx6i cagey tried that no difference at all .

[Cagey]

Assuming all the other swash responses are correct ? Yet elevator is reversed and doesn't respond to T/X reversal ? Have you tried reversing other channels, that'll tell you if that function of the T/X is okay or not. I ain't so clever about this but I'd guess if it's that one channel only that won't reverse, then a call to HH may be in order buddy. Unless one of our experts here has the solution ? Good luck with it , keep us posted.

[Stanley Speel]

Try doing it in the swash setup menu not the channel reverse menu.

[Cagey]

Just to clarify, if you're not too sure. In the swash menu, if the elev is + 60% select this and scroll through till it reads - 60 %. Worth a go buddy.