130x swashplate tilting

[markb75]

ive just had my 130x main board replaced by horizon due to it failing completely its been test flown at horizon and returned to me but when ive rebound it to my transmitter when you spool up the swash tilts all the way to the right so the heli is unflyable, but when you have TH on and move the sticks everything works as it should. any suggestions before i return it to horizon

[tomatwalden]

It's a known issue. Essentially it's a faulty heli. I had the same thing (see vid below) and returned it to HH. They replaced it, and my new one worked fine. People have found however that you can correct it using subtrim, but really this is a sticking plaster in my opinion. One the heli is airborne, the tilt goes away by the way.

[ROCKET RONNIE]

130x swashplate tilting

Mine does the same, I just take off and all is good

[glenflyer]

Hi use your sub trim its ok to do that with this heli thats what they say mine was the same its not a problem

[markb75]

Will give subtrim ago and see wot happens

[tourerjim]

Will give subtrim ago and see wot happens

What you do is if heli drifts as you lift off the add trim to compensate, once heli lift off nicely then you know you setup right

[tomatwalden]

Mine does the same, I just take off and all is good

Yeah - bizarrely it only ever happens before you take off. Take off very quickly and it's fine. I just wanted one that was right - HH replaced it, and all was good!