Tweet
Spin 8000 10T pinion vid
Couldn't help but put it back in but trying a 10t pinion instead of supplied 11t.My idle ups are now 70 and 80%.I get 3 mins on the gens 450 leaving 25%.
The motor is close to the servo but not touching.I had to elongate the holes some more and fitted washers to the screws.Mesh is about the same as it was on 11t.
The motor is close to the servo but not touching.I had to elongate the holes some more and fitted washers to the screws.Mesh is about the same as it was on 11t.