DX7 help

[heathy]

Just picked up my 130x, going through the set up and the destructions call for gyro sens @ INH, I can only get my DX7 [ old style] to show in gyro sens menu
Rudd D/R rate 50% 50% or switch to auto.

How do i INH it??

Cheers......

[Sesame]

In your model select menu. Make sure you have the correct model selected then scroll through the menus to the input select screen.

In there you have the aux2 and gear channel selectors one of these will be set to gyro. If you change this to inh the gyro menu will drop.

Hope this helps

[ducatimoto]

i had the same problem
there's a mistake in manual cause it's said to select gyro in input select and then select inh in gyro select

[heathy]

Thanks guys, got it!! As ducati said, there is a mistake in the manual. Cheers..

[martynv]

Yes I thought it was a bit pointless setting gear-gyro in the config menu especially when your going to disable it anyway. This explains quite a lot thanks

[Sesame]

to be fair when using the DX7 I never did activate the gyro menu as the gain went through the gear channel and therefore the endpoints were used to change the gain.
and the gear switch used to switch between heading and rate mode.