Announcement
Collapse
No announcement yet.
What is causing the wobble?
Collapse
X
-
-
about 30 seconds later the heli started shaking even worse so i landed. as i went to take off it lost tail rotation and i discovered the brand new metal tail gear was now missing.
i got out a little electric baton and wire locator and to my surprise i found it in the grass.
the only thing i can think is that the tail case wasnt pushed home enough?
i will redo it this afternoon.
i just did not think it would cause a head type wobble1x EGS, TREX 450 PRO DFC & 130X. DX9 radio. No idea what i am doing trying to fly
Comment
-
ho boggy
what is the best settings for a standard gyro settings on the 130x ???
cheers rogerBLADE 350X * BLADE 130X 1 * BLADE 130X 2 * BLADE NANO CPX * BLADE MCPX X 2 *
BLADE MCPX BL * BLADE 120SR *BLADE 200 MSR *
2 WINGS
TX SPECTRUM DX6I DX9
Comment
-
I like the std factory settings Roger never changed mine. To get rid of the horrible paddy it can suddenly throw I fitted canopy grommets sliced in half. (one bit on the inside of each swash ball.)
Comment
-
Mine has a head wobble side to side especially when flying into the wind. This is mainly exhibited as the skids wobbling sideways.
Feathering spindle / dampners?Happy Landings.
David
Winner of SEVEN of the BEST (Eddie Gold Stars)...humbled!
Raptor 50. OS50
Century Bell 47G in Yellow - Beautiful!
Mcpx
Blade 130x
Goblin 500
Comment
-
Oh does that work with the 130x as well? I might try that as mine has a fit every now and again.Originally posted by Boggy View PostI like the std factory settings Roger never changed mine. To get rid of the horrible paddy it can suddenly throw I fitted canopy grommets sliced in half. (one bit on the inside of each swash ball.)Pete
Oxy3, Logo 480xx, Logo 550sx, Rave Ballistic
Lynx Heli Team Pilot
Proud member of the "too stupid to fly" model heli club
Comment
-
hi ron
thanks fer input i am trying to get my 130x to gyro default ??
i have throttle stick 100% tx on plugged lipo in to 130 as said all i have is a constant blue light ???
help lol
rogerBLADE 350X * BLADE 130X 1 * BLADE 130X 2 * BLADE NANO CPX * BLADE MCPX X 2 *
BLADE MCPX BL * BLADE 120SR *BLADE 200 MSR *
2 WINGS
TX SPECTRUM DX6I DX9
Comment
-
It may not be seeing the high stick position as full throttle Roger. Go into the tx menu and raise the high throttle end point up.
Comment



Comment