Tweet
2nd day ( and 2nd flight ) with this Heli and its amazing today had a few successful hovers managed to hover in one spot (without drifting) for 5 seconds then brain decided to allow my fingers to slip with resulted in a crash, first major crash today managed to lower headspin then cut throttle to allow the blades to move in its holders, walked away with a little dent in the main blades, took it up again no problems to performance, but will need to replace regardless. 2nd successful hover happened after this crash, then managed to put it down nicely when i disconnected the battery i noticed that the battery moved back after the crash which i should of checked , because i didn't check it resulted in full up trim.
flew for about 4mins before stopping, for today. And only suffered a small dent in main blades and the tail fin knocked off centre (tail boom still straight)
This heli can sure take a beating and walk away from it o_O
I'm just wondering, when you set the trims, and then finish flying, are the trims saved the next time you turn on the transmitter? its the blade transmitter you get with the heli.
flew for about 4mins before stopping, for today. And only suffered a small dent in main blades and the tail fin knocked off centre (tail boom still straight)
This heli can sure take a beating and walk away from it o_O
I'm just wondering, when you set the trims, and then finish flying, are the trims saved the next time you turn on the transmitter? its the blade transmitter you get with the heli.
Comment