Trex 700 and ys91 align gov

[Telehandler]

Maidening my new 700 tomorrow and was wondering what the sweet spot was for the ys and hatori pipe head speed wise.currently have my other 700 with os90 at 1900 .could i go higher than this and what percentage should i be aiming for on the align gov?

[tonystevens]

You need to be aiming for around 1970 headspeed with the YS but im not sure what % that equates to with the align gov, its going to be around 80% but im not 100% sure on the exact figure sorry.

[Telehandler]

THanks tony . Ill see how i get on tomorrow bud as i dont have a tach unfortunately!

[GIXERMAN]

THanks tony . Ill see how i get on tomorrow bud as i dont have a tach unfortunately!

In your manual give headspeed for align gov if your using that type

[tonystevens]

just dug the manual out lol, 80% will give you 1951 headspeed so you want about 82-84% and that should be spot on mate.

[Telehandler]

700 manual only gives figures for futaba and jr but shows 80percent for 1951 h/s on jr so gonna start around 80 as tony mentioned .

[Telehandler]

Cheers tony lol great minds think alike hey.

[GIXERMAN]

Amazing what you find when you read your manuals

[moonmanflyer]

i think i found the sweet spot was between 83-85% on the gov that gave about 1950-1980 hs