600 nitro bearing block frame bolts....

[dogbiscuit]

.......The ones with the lug behind the head that fits into the oversize hole in the frame, stopping the main bearing blocks (and clutch) from moving. This lug/ridge restricts what bolts you can use if you want to replace the align ones. A little birdie told me that he thought it was possible to get adaptors that fit into the frame holes/or over normal bolts to solve this problem. If so, any idea who sells them. any links to them would be great.....
thanks

[tonystevens]

Here you go
ST Products 600/700 Special Washer Orange 20720344
Im sure other colours are available too.

[dogbiscuit]

thanks tony, they will do the trick....but what i was after (in the ideal world) was just the spacer ring bit, so i can use a set of wide headed lynx frame bolts that I allready have. If someone makes them that is.

[Baldie]

LYNX HELI , LLC

[dogbiscuit]

LYNX HELI , LLC

packs of 15 when you need 16 for the heli ! ....poor show from lynx. same with some of their other packs aslo.

As above though, can you get just a small spacer ring to go over a standard bolt

[tonystevens]

As above though, can you get just a small spacer ring to go over a standard bolt

Isnt that what i linked to? the bolts dont come with the spacers you have to buy those seperately.
They will accomodate a 6mm bolt head or are your bolt heads larger than that?

[dogbiscuit]

Isnt that what i linked to? the bolts dont come with the spacers you have to buy those seperately.
They will accomodate a 6mm bolt head or are your bolt heads larger than that?

sorry tony, I looked at the link, and did not scroll down the page to see the dimensioned picture. The bolt heads I have are the size of the whole washer i think (edit, measured at 7mm). I was looking for the 4.5 x 3 x 1mm bit if its available anywhere