450 tail blowout.

[jjjjdup]

Hi guys.
took a AR7200BX from one of my helis and stuck it on my 450 dfc.
all pods on beastx are in the middle. Default.
when looping or pumping pitch up down, it looses the tail.
any ideas.
has this to do with adjusting the pods
fly. Idle up 80% flat throttle and +12 -12

cheers

[Dan22]

450 tail blowout.

In the setup menu, have you set the tail servo to the correct frequency!

Dan.

[Lynx.1677]

Also does it have any tail precomp? I leave that stuff off. Endpoints all correct? binding in the tail mechanism?

[jjjjdup]

All setting are correct.
I have checked it with a pro who gives lessons

[Lynx.1677]

What have you checked? Even the pro's can overlook stuff.

I would check (yourself):
Binding in the tail mechanism
Tail servo end points are correct
Correct servo frequency
Tail precomp not active
Make sure you are in HH mode and gyro gain is high enough