Scratching Head???

[Bell47G]

Powering up the T Rex 250se, before we get to 0 Pitch the heli vibrates & trys to bog down??
Hitting 0 Pitch everything is fine? Take off hover great!! Then the Tail Kicks em! then it thinks its in stunt mode.
anyone know whats happening. and then the vibration comes back. trying to land very soft NO wants to bury its self! in the ground? (ESC problem??) I dont know, I'm new to CCPM.

[mole hunter]

Hi Bell,
Sounds like you've got too much pitch there. I've got -10, 0 and +10 on mine and it seems plenty. What have you got on your throttle and pitch curves?
Cheers, Marty

[Bell47G]

Hi Bell,
Sounds like you've got too much pitch there. I've got -10, 0 and +10 on mine and it seems plenty. What have you got on your throttle and pitch curves?
Cheers, Marty

as im new to ccpm THRO N 0-25-50-75-100 PITCH N 0-25-50-75-100 My Swash mix is Aile +60 Elev -60 Pitch +60 I read this some where on the forum.

[DaveJones]

50 on the pitch curve equals 0 pitch, 0 on the pitch curve would normally be around -11 degrees so you might want to up the pitch curve to around 35, 45, 50, 70, 90 to soften it down.

If you have a pitch gauge you can check what pitch you are actually getting, if not level the fly bar and at mid stick the blades should be flat

Also just check if the swash plate does what you would expect when you move the sticks.

[mole hunter]

Hi Bell,
Try a N pitch curve of 45, 47.5, 50, 75 and 100. You could really do with putting a pitch gauge on the blades to see what you've got there. You'll be able to check that the swash is level throughout its travel in normal and IU - disconnect the motor first.

Cheers, Marty