Announcement

Collapse
No announcement yet.

Lipo run time Trex 600

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Lipo run time Trex 600

    Run my new 600 up for the second time today, hovered on 3 lipos and just run for 4 mins..
    Re charged packs and put back 1150 into a 4800 revolution lipo..
    I am a beginer, not checked head spead yet.. need to get a tacho..should i expect to get 5 mins plus?
    Thanks
    Bell 47
    Trex 450s...died...rip
    Spectrum dx8i
    Trex 600
    Belt cp x2
    Blade 130 x 2

  • #2
    For hovering you should expect around 8 mins,you can safetly take around 3800 out of it

    Dont run the headspeed too low as the motor will be inefficient,also semi symmetrical blades will give a slightly improved duration apparently for upright flight

    Comment


    • #3
      Not used those packs yet, but on 4500mAH I can get 6.5mins leaving 22.2 -22.7 in the packs. But take it easy on your packs for a few flights.
      T Rex 600CF 2xTP4500, 2xTP5000,

      Comment


      • #4
        Great thanks both for info, Just set tranny alarm for 5 mins at mo.. will run that for about 6 charges and then go longer..
        Bell 47
        Trex 450s...died...rip
        Spectrum dx8i
        Trex 600
        Belt cp x2
        Blade 130 x 2

        Comment


        • #5
          When my Trex 600 and its lipos were brand new I had my timer set at 5 minutes and every flight was almost exactly 2000mAh, now I'm pushing a little harder I get through 3800mAh in 5 1/2 minutes.
          Steve H

          http://www.himbletonRChelicopters.co.uk
          Trex 600N, Trex 700N, now 3G!, Raptor E550 now in fetching Hughes 500E, Trex 250, Trex 500CF, Trex 550E 3G, Beam E4, Outrage 550, Logo 500 3D.

          Comment

          Working...
          X