T-Rex 600 Start-Up Costs

[3dbasher]

Your just power mad, next thing we know you'll try to take over the
world

nah i know when a models got enough... and john rex hasn't not quite comparable to my rappy 50 it needs an e govenor to get the most from out of it without scary overun at 0 collective.. prop hung his trainer today though

[stumpy]

Your just power mad, next thing we know you'll try to take over the
world

i can see him now sitting in his chair stroking his pussy, jr radio in one hand csm gyro in the other, POOTABA USERS WILL ALL DIE

[3dbasher]

so your saying that the difference between doing hard 3d and not is only 1 minute on the pack am i being optimistic hoping for 10 minute flight times?

7 mins maybe

[HighlanderJC]

The DX7 is a great Tx IMO, I did have the futaba T6exhp and when I got the DX7 I really did notice the difference. The 600 flys really well, but the set up is very important and I had loads of help from a friend with it. It hovers hands off with NO trim, none at all! I use 3x3050s and 401/9524. I had some probs with the tail boom case, (crappy plastic) so I fitted the torque tube ( dont have to keep loosening the bolts to tighten belt) and have also put on a raptor ally tail boom clamp.

[3dbasher]

i can see him now sitting in his chair stroking his pussy, jr radio in one hand csm gyro in the other, POOTABA USERS WILL ALL DIE

you got it lmao

[Disc]

nah i know when a models got enough... and john rex hasn't not quite comparable to my rappy 50 it needs an e govenor to get the most from out of it without scary overun at 0 collective.. prop hung his trainer today though

Yea that trainer is just nuts, I tryed it out on its 2-3rd flight it just pulls like no tomorrow straight up and doesn't stop.

That irvine 46 is just sooo powerful

biggles managed to get this picture though

[HighlanderJC]

Its NOT my one though! (the engines too small!)

[Disc]

Its NOT my one though! (the engines too small!)

LMAO

All the tutor 40's are just slow and feel sloppy compared to yours I will admit. yours flys like its on dam rails and the rails just go vertical

Bad news I will try and get time to teach you to land soon as we can get sometime at the site, on lates all week though.

[3dbasher]

LMAO

All the tutor 40's are just slow and feel sloppy compared to yours I will admit. yours flys like its on dam rails and the rails just go vertical

Bad news I will try and get time to teach you to land soon as we can get sometime at the site, on lates all week though.

point it at the ground it'll come down... only a bit of wood

[HighlanderJC]

so your saying that the difference between doing hard 3d and not is only 1 minute on the pack am i being optimistic hoping for 10 minute flight times?

Most I done was 6.5mins, but as I said still got 22.7v+ left in the packs. (6.5 is long enough for me at the mo, especially in that wind!!)

[Disc]

point it at the ground it'll come down... only a bit of wood

Think he wants to keep it in a plane shape.. but that said he's been letting me
teach him some stuff

[Disc]

Most I done was 6.5mins, but as I said still got 22.7v+ left in the packs. (6.5 is long enough for me at the mo, especially in that wind!!)

Yea goto of been a good 20mph the other day, nice flying thats for sure

[HighlanderJC]

Yea goto of been a good 20mph the other day, nice flying thats for sure

Yea, someone did'nt make it - got some kind of rash I heard!!

[3dbasher]

Yea, someone did'nt make it - got some kind of rash I heard!!

i think not.. you dirty old perv lmao.. just had a better offer

[Disc]

i think not.. you dirty old perv lmao.. just had a better offer

what to get the rash sorted